Page 6 of 35 Reference: 708052-1 Issue date: 23-Jul-2014 Revision: B
Features of the E1500 Hoist
Feature Function Benet
OPTIONAL Features of the E1500 Hoist
Features Function Benet
• Allows use of secondary
suspension wire rope for
required applications (double
deck, overhead protection,
some industrial applications)
or to eliminate independent
safety lines at very minor
additional cost
• Designed to mount into hoist
for maximum durability and
security
Built-in Secondary Wire
Rope
Voltage indicator
Built-in Overspeed Brake
Controlled Descent
Overload
(Optional) Top Limit
Switch
• Will trip at 1875 lbs (851 kg).
• Allows to be shop-set to
1,250 lbs (568 kg) on 1,500
lbs (681 kg) models
• Stops upward travel on
contact with an overhead
obstruction for special
applications
• More versatile hoist ready for
any application
• Eliminates possible loss /
damage because it is built-in,
rather than an added on
• Saves money because it is
less expensive than other
manufacturer’s.
• Reduces rigging material
and labor
• Easy installation
• Indicates voltage is owing to
unit
• Allows downward travel at a
controlled rate of speed in the
event of power loss
• Stops hoist in overspeed
condition
• Can’t be left behind in shop,
bypassed, or dismantled
• Easy visual inspection can
eliminate a service call
• Technician can diagnose
voltage problem by phone
• Ensures greater operator
safety
• Improved reliability
• Eliminates need for rescue
• Allows self-rescue of workers
and platforms
Remote Ready
• Built-in pendant port accepts
plug-in remote control
• Compatible with 700786-xx
series remotes
• No need to drill and wire
remote into hoist
• Leaves hoist mounted
controls operable
To Next Page
Loading...