Page 27 of 35 Reference: 708052-1 Issue date: 23-Jul-2014 Revision: B
MAINTENANCE
The hoist should be returned to a Power Climber dealer
for periodic maintenance at least once a year from date of
being placed into service.
More frequent service may be required if the hoist is
subjected to dirty environments.
If the hoist fails any inspection or operation, it
should be returned for service.
STOP! Read all Troubleshooting Guidelines before attempting
any solution.
TROUBLESHOOTING GUIDELINES
Problem Possible cause and solution
1. No power to platform.
( Low voltage
indicator light is OFF.)
Consult your supervisor
to correct problems.
1. Power at the junction box is off.
2. Circuit breaker is tripped.
3. Plugs are not connected. Check hoist, yoke, power
cord, and power source.
4. Damaged electrical cord.
5. Power indicator light is burnt out.
6. Not enough power is being supplied to hoist.
MAINTENANCE
= Inspect
= Verify
=Perform process
To Next Page
Loading...