Page 7 of 35 Reference: 708052-1 Issue date: 23-Jul-2014 Revision: B
GENERAL SPECIFICATIONS
Single Phase, 1.5 hp, 35 ft/min max.
Working Load Limit (WLL) 1,500 lbs. (681 kg)
Power Supply
220 VAC, 60 Hz, Single phase with automatic thermal
protection
Amperage at W.L.L. 10 Amps. 220V required at hoist.
Hoist Weight 136 lbs (62 kg)
Wire Rope Diameter 3/8” (9.53 mm)
Wire Rope Specication
6x19, IWRC (Independent Wire Rope Core), Right Regular
Lay, IPS (Improved Plow Steel) or EIPS (Extra Improved Plow
Steel), Preformed, Galvanized or Bright
User must verify that the wire rope meets or exceeds applicable
codes for breaking strength safety factor. Canadian standards
require 10:1, 3/8” (9.53 mm) wire rope with a min. breaking
strength of 15,000 lbs (66.7 kN) must be used when hoist is
used in Canada.
HAZARD SYMBOLS SUMMARY
Symbol Term Meaning
STOP
Stop action and follow instructions before
continuing
WARNING
Warns against possible immediate death or
serious injury
CAUTION
Warns against possible injury
ELECTRICAL
HAZARD
Warns against possible electrical shock
hazard
To Next Page
Loading...