Powercraft 05
Product information
Fig. 1
1. Speed control
2. Interlocking knob
3. Switch
4. Connection point vacuum cleaner
5. Allen key
6. Bottom plate
7. Saw buckle
8. Pendulum
9. Guard
10. Saw blade
11. Laser switch
Explanation of symbols
In this manual and/or on the machine the following symbols are used:
In accordance with essential applicable safety standards of European directives.
Class II machine - Double insulation - You don't need any earthed plug.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
Denotes risk of electric shock! Always check that the power supply corresponds to
the voltage on the rating plate.
Immediately unplug the plug from the mains electricity in the case that the cord
gets damaged and during maintenance
Read the users manual.
Caution! Laser beam! Never look into the light beam and never aim the laser at a
person when it is switched on.
Wear a dust mask. Working with wood, metals and other materials may produce
dust that is harmful to health. Do not work with material containing asbestos!
Hard materials such as steel, aluminium, plastic.
2. SAFETY INSTRUCTIONS
GB
16 Powercraft
UK
To Next Page
Loading...
Need help?
General
