Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model number: PS-750L 21
During maintenance and cleaning always remove the mains plug
from the socket. Never use liquids when cleaning electrical parts of
the jigsaw.
Maintain the jigsaw regularly to prevent unnecessary problems. This will
ensure that your appliance remains in optimum condition:
• Keep the bottom plate clean so that no inaccuracies occur during sawing.
• Keep the outside of the jigsaw clean so that all moving parts can move
accurately and without wear.
• Keep the ventilation slots of the motor clean so that these do not
overheat.
• The noise level will increase and the sound level will become uneven if the
carbon brushes are worn (they may need replacing). If this is not done the
jigsaw will stop working.
• Lubricate the saw blade guide regularly.
Cleaning
Regularly clean the machine housing with a soft cloth, preferably after each
use. Keep the ventilation slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.
Faults
Should a fault occur, please contact the address on the warranty card. On the
back page of this manual you find an exploded view showing the parts that
can be ordered.
Environment
To prevent damage during transport, the appliance is delivered in a solid
packaging which consists largely of reusable material. Therefore please make
use of options for recycling the packaging.
Faulty and/or discarded electrical or electronic apparatus have to
be collected at the appropriate recycling locations.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model number: PS-750L 04
Machine specifications Maintenance
Technical specifications
Product information
Fig. 1
Voltage 230 V~
Frequency 50 Hz
Input power 750 W
Speed, no load 800-3000/min
Max. cutting capacity wood 100 mm
Max. cutting stroke 20 mm
Cutting angle 0 - 45°
Machine weight 2.6 kg
Lpa Sound pressure level 89 dB(A)
Lwa Sound power level 102 dB(A)
Vibration 14.56 m/s
2
1
9
7
11
8
10
2
3
4
5
6
13
14
12
To Next Page
Loading...
Need help?
General
