SAFETY SYMBOLS
Always follow safety instructions to prevent accidents and potential hazards
from occurring.
Edition December 2012
This publication could present technical imprecision or misprints. The
information here included will be periodically modified and updated, and all
those modifications will be incorporated in later editions.
To consult the most updated information of this product you might access
through our website
www.power-electronics.com where the latest version of
this manual can be downloaded.
Revisions
Date Revision Description
03/04/2008 A First edition
31/03/2011 B Software Version Update SW 2026
30/01/2012 C Board update
20/12/2012 D Profipower SD700 Type 5
29/04/2015 E Modbus address and range in pre-defined register tables
This symbol means improper operation may results in
serious personal injury or death.
Identifies shock hazards under certain conditions.
Particular attention should be given because dangerous
voltage may be present. Maintenance operation should be
done by qualified personnel.
To Next Page
Loading...