Why does my Power Fist 8937260 lack power?
If your Power Fist Engine lacks power, the filter element(s) might be restricted; clean or replace them. Another reason could be stale fuel; in this case, drain the fuel tank and carburetor, then refuel with fresh gasoline. It could also be that the fuel filter is restricted, or there is a carburetor or ignition malfunction, or stuck valves.
Why is my Power Fist 8937260 shuddering?
If your Power Fist Engine shudders during operation, the choke lever position might be incorrect. Open the choke lever until the shuddering stops.
What to do if my Power Fist Engine emits smoke?
If your Power Fist Engine emits white smoke, it could be due to the engine being overloaded, so reduce the load. Another reason for white smoke is contaminated fuel, so replace the fuel with clean fuel. If the smoke is black, the engine might be overloaded, so reduce the load, or the air filter might be dirty, so clean it. If the smoke is blue, there may be excess engine oil, so drain oil until it is at the correct level, or the engine oil may be incorrect, so replace the oil with the appropriate grade.
General| Brand | Power Fist |
|---|---|
| Model | 8937260 |
| Category | Engine |
| Language | English |
Defines hazard notices like DANGER, WARNING, CAUTION, NOTICE.
Guidelines for operating in a safe work environment, keeping it clean, well-lit, and free of distractions.
Emphasizes wearing PPE and personal precautions like not operating when tired or under influence.
Important safety rules for engine operation, including not exceeding speed and avoiding hot surfaces.
Warning about operating engine in enclosed spaces due to deadly carbon monoxide gas.
Guidelines for safe fueling practices, including cooling the engine and keeping ignition sources away.
Provides a labeled diagram of engine components for familiarization.
Instructions for engine assembly and installation, emphasizing adding oil before starting.
Pre-operation checks to ensure safe and proper engine startup, including checking fluid levels and securing parts.
Overview of maintenance schedule, routine inspections, and simple maintenance procedures.
Specific steps to take when storing the engine for more than 30 days, including clean dry area and draining fuel.
Safety warning about keeping the engine away from ignition sources when storing with fuel.
Guidelines for safely transporting the engine, emphasizing an empty fuel tank or OFF position and keeping it level.
A guide to diagnosing and resolving common engine problems, with possible causes and suggested solutions.
A detailed list of engine components with corresponding part numbers and quantities for reference.
To Next Page
