Why Power Fist 8717621 Engine will not start?
- HhollyjenkinsAug 4, 2025
Your Power Fist Engine might not start due to several reasons. It could be as simple as the engine switch being in the OFF position; if so, move it to the ON position. Alternatively, the engine might be cold, in which case you should move the choke to the CLOSED position until warm, then move it to the OPEN position. Other potential causes include low engine oil (fill to the proper level with the recommended oil), or being out of fuel (refuel, ensuring the choke knob is set correctly if the engine is cold). A faulty or improperly gapped spark plug can also prevent starting; gap or replace the spark plug.