Power Master 0150LN - User Manual

DC TO AC POWER INVERTER
L-Series User Manual
Before install and use your Inverter,
read the User Manual and safety instructions.
12V / 24V / 48Vdc Input
115V / 230Vac Output
150W ~ 6000W Output cont.
Cooler housing design!!
Anytime, Anywhere
Power it up wherever you go!!
VER.C/980720

Summary

Safety Instructions

Explosive Gas Precautions

Equipment producing arcs or sparks must not be installed in compartments with batteries or flammable materials.

Precautions When Working With Batteries

Handle battery acid carefully; avoid sparks and metal tools near batteries; remove jewelry when working with lead-acid batteries.

Front View & Main Functions

Rear View & Main Functions

Electrical Requirements

Installation Requirements

Where to install

Inverter placement requirements: dry, temperature 0-40°C, away from flammable fumes, adequate ventilation, dust-free, near batteries.

AC safety Grounding

Connect AC input ground to utility source and AC output ground to load grounding point.

Neutral Grounding

Details neutral grounding connections for 115V and 230V models, including safety requirements.

Ground Fault Circuit Interrupters (GFCIS)

Explains GFCI protection requirements for RV and residential installations, and tested models.

Connection and Testing

Making DC Wiring Connections

Procedure for connecting battery cables to inverter DC input terminals, emphasizing cable length and gauge.

Operation

Trouble Shooting

AC output does not stay ON

Inverter shuts down due to Over Temperature

Inverter shuts down when trying to start a load

Troubleshooting guide

Low output voltage

Specifications

Power Master 0150LN Specifications

General

Input Voltage	12V DC
Output Voltage	110V AC
Continuous Power	150W
Surge Power	300W
Output Waveform	Modified Sine Wave
Frequency	60 Hz
USB Output	5V/2.1A
Efficiency	85%
Protection	Overload, Short Circuit