4
The Ringer Equivalence Number (REN) for the ION 8000 series optional internal modem is 0.6. Connection to the
ION 8000 series internal modem should be made via an FCC Part 68 compliant telephone cord (not supplied). The
ION 8000 series cannot be used on a public coin phone service or party line services.
Network Compatibility Notice for the Internal Modem
The internal modem in meters equipped with this option is compatible with the telephone systems of most countries
in the world, with the exception of Australia and New Zealand. Use in some countries may require modification of the
internal modem’s initialization strings. If problems using the modem on your phone system occur, please contact
Power Measurement Technical Support
Standards Compliance
Limitation of Liability
Power Measurement reserves the right to make changes in the device or its specifications identified in this
document without notice. Power Measurement advises customers to obtain the latest version of the device
specifications before placing orders to verify that the information being relied upon by the customer is current.
Regardless of whether any remedy set forth herein fails of its essential purpose, except to the extent the following
limitation is prohibited by applicable law, Power Measurement shall not, in any event or under any legal claim
or theory (whether based on contract, indemnity, warranty, tort (including negligence and strict liability) or
otherwise), be liable to the original purchaser or any other person or entity for special, indirect, incidental,
punitive, liquidated, special or consequential damages whatsoever with respect to any purchased product,
including, without limitation, business interruption, loss of use, profit or revenue, even if Power Measurement has
been advised of the possibility of such damages. To the extent that a limitation or exclusion of consequential
damages are prohibited by applicable law, then Power Measurement’s liability shall be limited to twice the
amount of the relevant purchased product.
The information contained in this document is believed to be accurate at the time of publication, however, Power
Measurement assumes no responsibility for any errors which may appear here and reserves the right to make
changes without notice.
For product or service warranty information, please refer to the applicable "Power Measurement Terms and
Conditions of Sale - Equipment" or "Power Measurement Terms and Conditions of Sale - Services" at the
following internet address:
http://www.pwrm.com/buy/terms/
Power Measurement, ION, ION Enterprise, MeterM@il, WebMeter, Energy Profiler, Energy Profiler Online,
Energy BOSS, E-VEE, and “drive energy performance” are either registered trademarks or trademarks of Power
Measurement. All other trademarks are property of their respective owners.
Covered by one or more of the following patents:
U.S. Patent No's 7010438, 7006934, 6990395, 6988182, 6988025, 6983211, 6961641, 6957158,
6944555, 6871150, 6853978, 6825776, 6813571, 6798191, 6798190, 6792364, 6792337, 6751562,
6745138, 6737855, 6694270, 6687627, 6671654, 6671635, 6615147, 6611922, 6611773, 6563697,
6493644, 6397155, 6236949, 6186842, 6185508, 6000034, 5995911, 5828576, 5736847, 5650936,
D505087, D459259, D458863, D443541, D439535, D435471, D432934, D429655, D427533.
© 2006 Power Measurement. All rights reserved.
To Next Page
Loading...
Need help?
General
