REAR WHEELS
Your wheels are made of injection molded nylon and will not rust. They are
also fitted with sealed precision bearings (7) which require no lubrication.
However they may need occasional adjustments, due to wear under normal
use. Too much side play or looseness or squeaking from your wheel means
it needs to be checked. In most cases, tightening of the axle bolt (2) will
rectify this condition. Should squeaking of looseness continue to exist after
adjustment, the bearings might have to be changed. See your servicing
dealer for assistance.
# Description Quantity
1 Wheel 2
2 Axle Bolt 2
3 Axle Receiver 2
4 Axle Plate 2
5 Axle Receiver
Nut
2
6 Hub Cap 2
7 Precision Bearing 4
3
4
5
7
2
6
1
7
To Next Page
Loading...