Power Probe ECT 2000 User Manual

5
Green = negative
Verde = negativo
Red = positive
Rojo = positivo
POWER PROBE I & II
Polarity testing
Contacting the Power Probe tip to a POSITIVE (+) circuit will light the LED indicator RED.
(The Power Probe 2 audio feature will sound a high pitched tone when contacting positive)
Contacting the Power Probe tip to a NEGATIVE (-) circuit will light the LED indicator GREEN.
(The Power Probe 2 audio feature will sound a low pitched tone when contacting negative)
Contacting the Power Probe tip to an OPEN circuit will be indicated by the LED indicator not lighting.
Probando Polaridad
Contactando la Punta del Power Probe a un circuito POSITIVO (+) se encenderá el LED indicador ROJO.
Contactando la Punta del Power Probe a un circuito NEGATIVO (-) se encenderá el LED indicador VERDE.
Contactando la Punta del Power Probe a un circuito ABIERTO, el LED no será encencendido.

Power Probe ECT 2000 Specifications

General

Brand	Power Probe
Model	ECT 2000
Category	Measuring Instruments
Language	English