Power Probe 3EZ - User Manual

Power Probe 3EZ
INTRODUCTION
Thank you for purchasing the Power Probe 3EZ (PP3EZ). The
PP3EZ includes all the powerful testing modes and features
of the Power Probe 3S plus now includes 2 new modes - EZ
Learning Mode and EZ Diagnostics Mode. The PP3EZ speeds
you through the diagnosing of 12 to 24 volt automotive elec-
trical systems. After connecting the PP3EZ’s clips to the ve-
hicle’s battery, the automotive technician can determine at a
glance, the voltage level and the polarity of a circuit without
running for a voltmeter or reconnecting hook-up clips from
one battery pole to the other. The power switch allows the
automotive technician to conduct a positive or negative bat-
tery current to the tip for activating and testing the function of
electrical components without wasting time with jumper leads.
WWW.POWERPROBETEK.COM
5000815

Summary

INTRODUCTION

HOOK UP AND QUICK SELF-TEST

TURNING AUDIO TONE ON & OFF

CIRCUIT BREAKER FUNCTIONALITY

INTRODUCTION TO “EZ” MODES

EZ Learning Mode

Step-by-step guide to familiarize with the PP3EZ operation and responses.

EZ DIAGNOSTICS MODE

CONTINUITY TESTING

ACTIVATING COMPONENTS IN HAND

TRAILER LIGHT CONNECTIONS

ACTIVATING COMPONENTS ON VEHICLE

ACTIVATING COMPONENTS WITH GROUND

CHECKING FOR BAD GROUNDS

FOLLOWING & LOCATING SHORT CIRCUITS

RED;GREEN INDICATORS & TONES

FLIP SCREEN FUNCTION

MODES OVERVIEW

Voltmeter Mode

Display voltage levels, polarity, and peak-to-peak signals.

PEAK TO PEAK MODE DETAILS

MAX & MIN PEAK MODES

AC THRESHOLD SETTING

SPECIFICATIONS

Operating & Storage Conditions

Details on temperature, humidity, and pollution degree for the device.

Voltage & Frequency Ratings

Specifications for DC Voltage, P-P Voltage, and Frequency Response.

CIRCUIT BREAKER SPECIFICATIONS

OVER VOLT & OVER LOAD WARNINGS

REPLACEMENT PARTS

POWER PROBE WARRANTY

Power Probe 3EZ Specifications

General

Display	LCD
Circuit Tester	Yes
Voltmeter	Yes
Ohmmeter	No
Frequency Tester	No
Pulse Width Tester	No
Continuity Test	Yes
Power Supply	Vehicle Battery
Voltage Range	0-70 VDC
Cable Length	20 ft
Operating Voltage	12 to 24 VDC