Power Probe 3EZ - HOOK UP AND QUICK SELF-TEST; TURNING AUDIO TONE ON & OFF

Unroll the Power Probe cable. Connect the RED battery hook-
up clip to the POSITIVE terminal of the vehicle’s battery. Con-
nect the BLACK battery hook-up clip to the NEGATIVE termi-
nal of the vehicle’s battery. When the PP3EZ is first connected
to a battery (power source), it will sound a quick start up tone
and then go into Voltmeter Mode (See Mode #1) and the 2
bright white LEDs (dual headlights) will be on to illuminate the
test area of the probe tip.
WWW.POWERPROBETEK.COM
5
HOOK UP AND QUICK SELF-TEST
TURNING AUDIO TONE ON & OFF
While the PP3EZ is in Voltmeter Mode, press the left button to
toggle the tone on or o. When the left button is pressed, if a
short high beep is heard, this means the audio tone is turned
on. If a short low beep is heard, the audio tone has turned o.