Need help?Do you have a question about the Power Probe IV and is the answer not in the manual?
General| Brand | Power Probe |
|---|---|
| Model | IV |
| Category | Measuring Instruments |
| Language | English |
Details on probe tip, LEDs, color screen, buttons, rocker switch, and speaker.
Serial number, circuit breaker, USB connector, fuse, and rear cover identification.
How to connect the power lead to the vehicle's battery terminals.
Explains the role and testing of the auxiliary ground lead.
Describes the integrated LED flashlight for dark areas.
Lists and briefly describes the 8 different test modes available on the Power Probe IV.
Step-by-step instructions on navigating and selecting different test modes.
How to measure DC voltage and use the probe to supply power or ground.
Using VDC mode to energize and test components like lights, motors, and solenoids.
Measuring circuit resistance and voltage drops on static or active circuits.
Measuring RMS averaged AC voltage and its applications.
Measuring the total voltage difference between extremes in an AC signal.
Measuring signal frequency and pulse width for sensors and circuits.
Using the Power Probe ECT2000 to detect open circuits in wiring.
Analyzing fuel injector waveforms and circuit performance.
Testing ECU driver circuits for components like solenoids and relays.
Step-by-step instructions for replacing the rocker switch.
Instructions for replacing the internal circuit breaker.
To Next Page
