WWW.POWERPROBETEK.COM
4
TABLE OF CONTENTS
Hook-up and quick self-test 5
Turning the Audio Tone On & O 5
Circuit Breaker 5
Voltage & Polarity testing 5
Continuity testing 6
Introduction to “EZ” 7
Guided Diagnostics 8
Testing Section 9
Continuity Testing 10
Activating components in hand 11
Testing trailer lights and connections. 13
Activating electrical components in the Vehicle 14
Activating electrical components with Ground 16
Checking for bad ground contacts 18
Following & Locating Short Circuits 19
Red/Green Indicator & Audio Tone 19
Flip Screen Function 19
Modes 20
Specifications 27
Replacement Parts 29
Power Probe warranty 29
Power Probe TeK Contact Details Back Cover
IMPORTANT TIP: When powering-up components, you can in-
crease the life of your Power Probe switch if you first press the
switch, then contact the tip to the component. The arcing will
take place at the tip instead of the contacts of the switch.
To Next Page
Loading...
