Product is not water resistant, please avoid water contact
during operation.
If the test leads need to be replaced, you must use a new one
which should meet EN 61010-031 standard.
The Power Probe 3EZ is NOT to be used with 110/220V
HOME electrical, it is only for use with 12-24V systems.
The Power Probe 3EZ Conforms to UL STD. 61010-1, 61010-2-
030 and 61010-031; Certified to CSA STD. C22.2 NO. 61010-1,
61010-2-030 and 61010-031.
To switch languages on the PP3EZ, with the hook up clips re-
moved from the battery, press and hold the right button. While
holding the right button, attach the hook up clips to the bat-
tery power. The language options will appear on the screen.
Choose the desired language by pressing the left button.
Press the right button to set the language.
WWW.POWERPROBETEK.COM
3
INTRODUCTION CONTINUED
To Next Page
Loading...
