EasyManuals Logo

Power smart 196cc User Manual

Power smart 196cc
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
20
9. TECHNICAL & CONSUMER INFORMATION
TECHNICAL INFORMATION
Serial Number Location
Record the engine serial number in the space below. You will need this serial number
when ordering parts, and when making technical or warranty inquires.
Engine serial number:
Carburetor Modification for High Altitude Operation
At high altitude, the standard carburetor air-fuel mixture will be too rich. Performance will
decrease, and fuel consumption will increase. A very rich mixture will also foul the spark
plug and cause hard starting. Operation at an altitude that differs from that at which this
engine was certified, for extended periods of time, may increase emissions.
High altitude performance can be improved by specific modifications to the carburetor. If
you always operate your engine at altitudes above 5,000 feet (1,500 meters), have your
servicing dealer perform this carburetor modification. This engine, when operated at high
altitude with the carburetor modifications for high altitude use, will meet each emission
standard throughout its useful life.
Even with carburetor modification, engine horsepower will decrease about 3.5% for each
1,000-foot (300-meter) increase in altitude. The effect of altitude on horsepower will be
greater than this if no carburetor modification is made.
When the carburetor has been modified for high altitude operation, the air-fuel
mixture will be too lean for low altitude use. Operation at altitudes below 5,000 feet
ENGINE TYPE
SERIAL NUMBER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Power smart 196cc and is the answer not in the manual?

Power smart 196cc Specifications

General IconGeneral
TypeSingle cylinder, 4-Stroke, Forced Air Cooling, OHV
Bore×Stroke(mm)68×54
Displacement(cc)196
Net power(kW/3600rpm)4.1
Net torque (N·m/rpm)12.4/2500
Fuel consumption (g/kW·h)≤395
Speed Fluctuating Ratio≤10%
Compression Ratio8.5:1
P.T.O shaft rotationAnti-clockwise(from P.T.O. side)
Oil capacity(L)0.6
Noise(≤)70dBA
Lubricating modeSplash
Starting ModeRecoil start / Electric starting
Valve Clearanceinput valve:0.10~0.15mm, output valve:0.15~0.20mm
Spark plug clearance0.7~0.8mm
Igniting ModeTransistorized magneto Ignition
Air cleanerNo filter
Weight and Dimensions IconWeight and Dimensions
Dimension(L×W×H) (mm)382×354×276