Power smart DB7624E User Manual

25
Problem
Causes
Remedy
Auger System
Auger belt broken,
or repeated failure
Auger tension pulley arm return
spring broken or missing
Replace tension arm return spring
Auger tension pulley arm stuck or
binding
Repair or replace tension arm as necessary
Auger tension pulley arm or
pulley
misaligned or damaged
Repair, replace or align tension arm and or
pulley as necessary
Foreign material on pulleys and
belt, oil, grease, dirt etc.
Clean belt and pulleys as necessary, replace
belt if necessary
Auger pulleys misaligned, loose,
damaged or bent
Replace or align pulleys as necessary
Incorrect or damaged auger belt
Replace with correct size and type belt
Auger belt guide pin not adjusted
Adjust belt guide pin to within 1/8 to 3/16 in.
from pulley. (Guide pin keeps belt in pulley
when disengaged)
Auger rotating
when
auger control
handle released
Auger tension pulley arm return
spring broken or missing
Replace tension arm return spring

Power smart DB7624E Specifications

General

Brand	Power smart
Model	DB7624E
Category	Snow Blower
Language	English