Power World PHP03Hs-W - Page 2

- 2 -
WiFi Swimming Pool Heat Pump
User and Service manual
INDEX
1. Specifications
2. Dimension
3. Installation and connection
4. Accessories
5. Electrical Wiring
6. Display Controller Operation
7. Running data setting
8. Troubleshooting
9. Exploded Diagram
10.Maintenance
11.Warranty and returns
Thank you for using swimming pool heat pump for your pool heating, it will heat your pool
water and keep a constant temperature when the ambient air temperature is at -5 to 43℃
ATTENTION: This manual includes all the necessary information about the use and
the installation of your heat pump.
The installer must read the manual and attentively follow the instructions of implementation
and maintenance.
The installer is responsible for the installation of the product and should follow all the
instructions of the manufacturer and the regulations in application. Incorrect installation
against the manual implies the exclusion of the entire guarantee.
The manufacturer declines any responsibility for the damage caused to people, objects and
for errors due to the installation against the manual. Any use that isn’t in accordance with the
origin of its manufacturing will be regarded as dangerous.
WARNING: Please empty the water in heat pump always during winter time or when the
ambient temperature drops below 0
℃
, or else the Titanium exchanger will be damaged
because of being frozen, in such case, your warranty will be lost.
WARNING: Please always cut the power supply if you want to open the cabinet to reach
inside the heat pump, because there is high voltage electricity inside.
WARNING: Please keep the display controller in a dry area, or close the insulation cover to
protect the display controller from being damaged by humidity.