PAGE 11 OF 19
Make sure all the side walls are square and
aligned at the top
9. When you have secured all the wall panels together you then need to secure these to the floor using
70mm screws provided. Screw into the floor with 2x screws for every wall panel (internally) ensuring
the screws are driven through the framing at the bottom of the side/gable walls, through the
floorboards and into the floor joists.
USEFUL TIP! – You can work out the position of the floor joists from the location of the existing nails in
the floor. It may need screwing at an angle to ensure the screws go into the floor joists as bracing or
upright pieces of framing could be in the way
To Next Page
Loading...
