Power Pent - User Manual

Pent Bike Shed Instruction Manual
WARNING
UNPACKING SAFELY
Please follow these instructions to unpack your garden building safely
• Two people minimum to unpack
• Place the pallet on firm level ground
• Cut the plastic banding
• Remove each panel by removing screws one column at a time as indicated below
• Check all the components against the instructions / check list

Summary

Unpacking Safely

Component Verification

Verify all components against the instructions or check list.

Before You Start

Health and Safety Precautions

Essential health and safety guidelines for handling and assembling the shed.

Timber Properties

Firm and Level Base

Requirements for a stable and level base for constructing the garden building.

Component Checklist

Fixing Pack Contents

Pre-Assembly Checks

Drilling Recommendations

Floor Assembly

Wall Erection

Front Top and Gables Installation

Roof Assembly

Door Installation

Roof Felt Application

Safety: Use Safety Goggles

Safety advice for wearing goggles during roofing felt installation.

Safety: Use Step Ladders

Power Base Installation

Power Pent Specifications

General

Brand	Power
Model	Pent
Category	Garden Houses
Language	English