Power Apex - User Manual

________________________________________________________________
WARNING
UNPACKING SAFELY
Please follow these instructions to unpack your garden building safely
• Two people minimum to unpack
• Place the pallet on firm level ground
• Cut the plastic banding
• Remove each panel by removing screws one column at a time as indicated below
• Be careful of loose components inside the pack when removing panels
• Check all the components against the checklist prior to install
________________________________________________________________
BASE KIT AND FIXING PACK
8ft Wide Apex
Instruction Manual
Please note – if you have ordered a base kit it’s unlikely you will be able to see the base kit from
the outside of the pack - it will be inside your panels. The fixings are also inside the pack.

Summary

Unpacking Safely

Before You Start

Health and Safety Precautions

Essential safety guidelines and personal protective equipment recommendations for safe assembly and handling of shed components.

Timber Treatment and Handling

Information on handling treated timber, potential reactions, and protective measures required.

Timber and Base Preparation

Firm and Level Base Requirements

Guidelines for preparing a stable, level base, including placement considerations and base types.

Component Checklist

Fixing Pack and Assembly Preparation

Fixing Pack Contents

Pre-Assembly Steps

Instructions for safely unpacking components, checking parts, and preparing timber before assembly.

Drilling Recommendations

Floor Assembly

Door Installation

Wall Panel Assembly

Gable Top Installation

Truss Assembly

Roof Installation

Roof Felt Application

Aftercare and Maintenance

Shed Preservative and Re-treatment

Power Apex Specifications

General

Brand	Power
Model	Apex
Category	Garden Houses
Language	English