3
General Safety Warnings
General safety
General safety
Important - Please read these instructions
fully before starting assembly.
IMPORTANT!
When using this equipment, the following
safety
precautions must be followed to avoid
injuries and damage:
• Read all operating instructions carefully and
comply with them. It is important to
understand these instructions and to
acquaint yourself with the machine, its
correct usage and all safety requirements.
• Keep this manual in a safe place so that the
information is available to the operator at
all times.
• If you give the equipment to any other
person, give them these operating
instructions as well. We accept no liability for
damage or accidents which result from
non-compliance of these instructions.
NOTE: Only supply power to the equipment
through a circuit protected by an RCD with a
maximum trip current of 30mA.
• Use only plugs or connectors approved for
outdoor use.
To Next Page
Loading...
