EasyManua.ls Logo

PowerBase 577146 - General safety during usage

PowerBase 577146
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Ensure that the trimmer will operate
properly and perform its intended function.
Have any damaged or defective parts
repaired or replaced by an authorised repair
agent.
Before use, check the mains cable for signs
of damage, ageing or wear. If the mains cable
is worn, damaged or defective, do not use
the trimmer.
If the mains cable is damaged or defective
it must be repaired by an authorised repair
agent to avoid any further hazard.
Never attempt to remove or replace any
parts other than those specified in this
manual.
General safety during usage
This trimmer is double insulated; therefore,
no earth wire is required. Always check that
the power supply corresponds to the voltage
on the rating plate.
Before using the trimmer, check that your
cutting path is free from sticks, stones, wire
and any other dangerous objects that may
cause damage or be thrown from the trimmer.
Only use the trimmer in the correct position,
with the cutting line near the ground. Never
switch the trimmer on in any other position.
Switch on the trimmer only when hands and
feet are at a safe distance from the cutting line.
Avoid any body contact with the cutting line
while the trimmer is running.

Related product manuals