To Next Page
S
Sean MooreAug 4, 2025
Why PowerBase SLK26B Trimmer engine is not starting?
- AAshley PowersAug 4, 2025
There are several reasons why the PowerBase Trimmer engine might not be starting: * The tank may be empty. If this is the case, fill it up. * The engine might be flooded. To resolve this, close the throttle and pull the cord several times. If it's still not starting, take out the spark plug and dry it. * The spark plug could be fouled with carbon deposits on the electrodes. Clean the spark plug, check its temperature, and replace it if necessary. * The electrode gap might be too large. Adjust it to be within 0.6-0.7mm. * The carburetor or its jets could be fouled. Clean the carburetor with air. * There may be a damaged spark plug connection or a damaged spark plug. Replace the spark plug in this case.
General
