21
Stopping
The hedge trimmer is equipped with an automatic brake system
for quick stopping, which stops the blade immediately once the
throttle is released to prevent a possible accident.
If you want to switch off the machine completely, you must
move the switch into the ‘STOP’ position.
Cleaning the Air Filter
1) Loosen the screw from the air filter housing and remove
the cap.
2) Remove the air filter.
3) Wash the air filter in warm water (with a small amount of
detergent).
4) Rinse the air filter through with clean water.
5) Leave the air filter to dry out completely.
6) Replace the air filter.
7) Replace the cover with the lugs positioned in the notches in the
air filter casing.
8) Close the lid, and tighten the bolt again by screwdriver.
To Next Page
Loading...
