9
G. Do not use deformed or damaged
cutting blades (cutting blade
destruction).
• Switch off the engine before you start
adjusting or maintaining the machine.
• Make this instruction manual available
to everybody who is working with the
machine.
• Use this machine only for trimming
hedges, foliage, and cutting wood, max.
22mm.
• Do not use trimmers in the vicinity of
flammable fluid or gas.
• Have the trimmer repaired in an
authorised service centre. Do not attempt
to repair it yourself.
• Repairs and part replacements can be
carried out only by an authorised service
centre.
• Keep your workplace clean. Remove
trimmed waste and clear away objects
you no longer require.
• Ensure a good foothold; be careful not to
stumble in the vicinity of the trimmer.
• The person working with the machine
should not get disturbed.
• Inspect the blades before use. They
should be well sharpened, without cracks,
kinks, or deformations.
• Faulty cutting blades should be replaced
immediately.
• Never use cutting blades that do not
correspond with the technical data stated
in this instruction manual.
To Next Page
Loading...
