10
• Make sure the cutting blade is installed in
the right position.
• The machines protective device cannot
be disassembled or made dysfunctional
in any way.
• Damaged or faulty protective devices
should be replaced immediately.
• Ensure that the hedge trimmer is correctly
located in a designated working position
before starting the engine.
• While operating the hedge trimmer,
always ensure that the operating position
is safe and secure, especially when using
steps or a ladder.
• Always be aware of your surroundings and
stay alert for possible hazards, which you
may not be aware of due to the noise of
the hedge trimmer.
• At regular intervals, check all screws, nuts
and fittings are tight enough.
• Never deposit tools or materials above the
machine so that they could fall down on it.
• Make sure your hands are in the right
positions, e.g. make sure they cannot slide
and suddenly come in contact with the
cutting blade.
• The material you want to cut should
not include nails or other similar foreign
matters.
• Do not overload the machine otherwise it
will slow down and get overheated.
• Never attempt to remove loose trimmings
or wood fragments or jammed material
when the machine is working.
To Next Page
Loading...
