26
Technical Data
Technical data table
Specification Value
Model GT3011A
Rated input voltage 220-240V~, 50Hz
Power input 550W
Idling speed 9700min
-1
Cutting circle dual line 300mm
Dual line 2 x 5m, fully automatic
Line thickness dual line 1.6mm
Protection class
Protection category IP20
Guaranteed sound power level (L
WA
) 96dB(A)
Measured sound pressure level (L
pA
) 85dB(A), K=3dB
Measured sound power level (L
WA
) 94dB(A), K=2dB
Vibration (a
h
) at the main handle 3.7m/S
2
, k=1.9m/S
2
Vibration (a
h
) at the auxiliary handle 1.6m/s
2
Net weight 3.1Kg
II
Noise and vibration values have been determined according to the
standards and regulations mentioned in the declaration of conformity.
The vibration and noise measuring processes in accordance with EN 786,
appendices D and E, were completed successfully.
Technical and design changes may be undertaken in the course of further
development without notice. All dimensions, references and information in
this instruction manual are therefore not guaranteed. Legal claims made on
the basis of the instruction manual can therefore not be considered as valid.
The stated vibration emission value was measured in accordance with a
standard testing procedure and may be used to compare one power tool
to another. The stated vibration emission value may also be used for a
preliminary exposure assessment.
/
To Next Page
Loading...
