EasyManua.ls Logo

PowerBase 577166 - Operating the Hedge Trimmer; Switching On;Off

PowerBase 577166
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Operating the hedge trimmer
Switching on/off
WARNING!
If any parts are missing, damaged or broken, do not
operate your hedge trimmer until all damaged parts have
been replaced or repaired. Failure to do so could result in
serious personal injury.
For your safety, this tool is equipped with a dual safety-switch
system. This system prevents starting the tool inadvertently and
will only allow operation while holding the tool with both hands.
Switching on
Hold the product with one hand at the rear handle and the other at
the front handle. Press the trigger (8) and the front handle safety
switch (5) at the same time to switch the product on.
Switching off
Release the front handle safety switch (5) or the trigger (8).
Never attempt to lock the dual safety-switch system in the on
position.
5
8

Related product manuals