22
Working instructions
Extending the cutting line
WARNING! Do not use any kind of metal wire or metal wire
encased in plastic in the line spool. This may cause serious
injuries to the user. To extend the cutting line, run the
engine at full speed and tap the line spool on the ground.
This will automatically extend the line.
The blade on the safety shield will cut the line to the appropriate
length.
IMPORTANT: Remove all grass and weed remnants at
regular intervals to prevent the shaft tube overheating.
Lawn, grass and weed remnants become trapped
under the safety shield and prevent the shaft tube from
receiving adequate ventilation. Remove the remnants
carefully using a tool. Do not use bare hands.
Different cutting methods
When the equipment is correctly assembled it will cut weeds and
long grass in places which are difficult to access, e.g. along fences,
walls and foundations, and trees. It can also be used for ‘mowing’
down vegetation to prepare a garden for other applications.
To Next Page
Loading...
