17
Important charging notes
1. Never allow the battery to completely discharge before
recharging. The battery pack should be placed on the charger
whenever the battery pack is noticeably running down or the
tool no longer performs a task it previously performed.
2. Avoid conducting short charges. Make sure that the battery is
fully charged each time by allowing the charger to complete its
full charging cycle.
3. Avoid allowing loose items like screws or nails etc. to be stored
with battery packs as these or similar items can short battery
packs and cause a fire or explosion
4. Always unplug the charger when not in use and store in a dry
and secure place.
5. Avoid charging or storing your battery in temperatures below
5°C and above 45°C.
6. After use, allow the battery to pack to cool down for
approximately 30 minutes before attempting to recharge.
WARNING! Don’t allow any liquid to get inside the charger;
electric shock may result. To facilitate the cooling of the
battery pack after use, avoid placing the charger or battery
pack in a warm environment, such as in a metal shed, or
an uninsulated trailer.
WARNING! Never attempt to open the battery pack for
any reason. If the plastic housing of the battery pack
breaks or cracks, return it to a service centre for recycling;
do not put it into further use.
To Next Page
Loading...
