6
11. Stop the blades if the product has to be
tilted for transportation, when crossing
surfaces other than grass, and when
transporting the product to and from the
area to be mowed.
12. Never operate the product with defective
guards or shields, or without safety
devices in place, such as deflectors or
the grass collector.
13. When switching on the motor, keep feet
well away from the blades.
14. Do not tilt the product when switching
on the motor, except if the product has
to be tilted for starting. In this case, do
not tilt it more than absolutely necessary
and lift only the part furthest away from
the operator.
15. Do not start the product when standing
in front of the discharge opening.
16. Keep clear of the discharge opening at
all times.
17. Do not put hands or feet near or under
rotating parts.
18. Do not transport the product while the
cutting blade is running.
19. Stop the product and remove the key/
battery pack from the machine and
make sure that all moving parts have
come to a complete stop:
• Whenever you leave the product
unattended.
• Before clearing blockages or
unclogging the chute.
To Next Page
Loading...
