EasyManua.ls Logo

PowerBase 660834 - Operation

PowerBase 660834
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Operation
Charging the battery pack
NOTE: The battery pack comes partly charged. Charge the
battery pack prior to first use, ideally at least 60 minutes.
Always pull out the plug of the charger from the
mains before removing or connecting the battery
pack to the charger.
Never charge the battery pack when the ambient
temperature is below 0°C or above 45°C.
Never recharge a battery pack again immediately
after rapid charging. This could overcharge the battery
pack, thus reducing the lifespan of the battery pack
and charger.
Rest the charger for at least 15 minutes between
charging sessions.
If no battery pack is inserted into the charger and the
charger is connected to mains, the charging status
LED illuminates red.
NOTE: Always fully charge the two batteries at the
same time.
Checking battery capacity
Press the battery capacity level button to check the charging level
of the battery pack. The status/remaining charge will be shown on
the battery digital display.

Related product manuals