27
Align the battery pack with its compartment on the lawn mower.
Push the battery pack into the tank until you hear a click. This
means the battery pack has been locked in position, then close
the battery pack tank cover.
Removing the battery pack from the lawn mower
Open the battery pack tank cover. Press the battery pack release
button on the battery pack, then pull the battery pack out.
Setting the cutting height
If you wish to change the cutting height, you need to hold the
carry handle and push the adjusting button up and down to select
desired cutting height.
The number on the height bar aligning on the motor housing
shows the cutting height position.
To Next Page
Loading...
