2 PB70 - W18XC1052 - Revised 040113
PAGE INDEX Page No.
Machine Specification 3
Explanation of symbols used 4
Intended use of power tool 5
Prohibited use of power tool 5
Safety precautions
1 - Precautions and use of PPE. 6
2 - Special safety precautions - Magnetic Drills. 7
3 - Electrical safety 8
4 - Dust Extraction 8
5 - General safety instructions. 9-10
Installation instructions
1 - Unpacking and Assembly 11
2 - Setting-up or fixing tool in a stable position. 11
3 - Connection to power supply. 11
4 - Illustrated description of functions 12
5 - Limitations on ambient conditions 13
6 - Standard Accessories 13
7 - Disassembly and transportation 13
Operating instructions
1 - Setting and testing. 14
2 - Tool changing - Mounting of cutters into the arbor. 14
Fitting the MT3 arbor. 15
Removing the MT3 arbor. 15
Using Twist Drills. 15
3 - Guards 16
4 - Clamping of work. (Magnet Control) 16
5 - Limits on size of work piece and type of material.
Cutting Speeds/Materials—HSS cutters 17
Workpiece Material and size Limitations 17
6 - General instructions for use.
Drill unit spindle - start / stop - gear selection 18
Drill unit speed control - torque boost - spindle direction 19
Tapping 20-21
Reversing of the handles 22
Normal operator position 22
Using the drill with annular cutters 23
Motor Protection 24
Coolant 24
7 - Lifting handles/transportation. 5
Maintenance and servicing
1 - Regular cleaning, maintenance and lubrication. 25
2 - Servicing by manufacturer. 26
3 - Special Tools 13
4 - Blockages of chips or work piece fragments. 23
To Next Page
Loading...
