POWERBOR PB70 User Manual

PB70 - W18XC1052 - Revised 040113
The POWERBOR range of machines are exclusively manufactured by
G&J Hall Ltd, Burgess Road, Sheffield, S9 3WD, England
POWERBOR - PB70 DRILL
ORIGINAL INSTRUCTIONS
WARNING !
When using electric power tools basic safety
precautions should always be used to
reduce the risk of fire, electric shock and
personal injury.
Read all of these instructions before
attempting to operate this product and save
these instructions
Machine shown
PB70 - without the
safety guard for clarity.

POWERBOR PB70 Specifications

General

Brand	POWERBOR
Model	PB70
Category	Drill
Language	English

Summary

Machine Specification

Intended Use of Power Tool

Prohibited Use of Power Tool

Personal Safety and Use of PPE

Personal Protective Equipment (PPE)

Special Safety Precautions - Magnetic Drills

Electrical Safety

Dust Extraction

General Safety

Unpacking and Assembly

Setting Up the Tool

Connection to the Power Supply

Illustrated Description of Functions

Setting and Testing - Using the Safety Strap

Mounting Cutters into the Arbor

Fitting the MT3 Arbor

Removing the MT3 Arbor

Using Twist Drills

Safety Guard

Clamping - Magnet Control

Cutting Speeds/Materials - HSS Cutters

Workpiece Material and Size Limitations - Magnet

Operation - Spindle - Start/Stop

Operation - Spindle Speed - Gear Selector

Operation - Spindle - Speed Control

Operation - Spindle - Torque Boost

Operation - Spindle Direction - FWD/N/REV

Tapping

Operation - Reversing of the Handles

Operation - Normal Operator Position

Operation - Using the Drill with Annular Cutters

Operation - Blockages of Chips and Workpiece Fragments

Motor Protection

Maintenance - General

Maintenance - Replacing Brushes

Maintenance - Tool Use and Care

PB70 Wiring Diagrams