PowerBox Systems GPS III User Manual

www.powerbox-systems.com 7
PowerBox Terminal for the PC is available for downloading from our website. The
mobile apps can be found in the Play or App store under Mobile-Terminal.
4. POSITIONING IN THE MODEL
When installing the GPS III please ensure that it is not too close to other cables
carrying current or data. The GPS satellite signals from space are very weak, so
the GPS III is tted with a highly sensitive RF signal amplier in order to condition
the signals. The amplier also magnies potential interference from the immediate
environment, which could have an adverse effect on reception. If possible, keep the
unit at least 5 cm – better 10 cm – from all other cables in the model.
It is also essential to keep the GPS III well away from materials such as carbon
bre or metal, which would shield the signal.
The patch leads to the GPS III may safely be extended up to a length of 5 m – the
digital bus systems still work without error with extended cables.
5. AFTER SWITCHING ON
Once switched on, the GPS III searches for as many satellites as it can nd; this
process takes about 30 – 60 seconds. Four different operating modes are available
with the GPS III:
a) No x
The LED ashes slowly – The bus system has been detected, satellite search in
progress.

PowerBox Systems GPS III Specifications

General

Brand	PowerBox Systems
Model	GPS III
Category	Measuring Instruments
Language	English