www.powerbox-systems.com 9
6. REGULATOR ERRORS
The unit constantly monitors the operation of the voltage regulators. If the output
voltage strays outside the correct value, the LEDs indicate this by lighting up violet
and ashing rapidly. Regulator errors typically occur when a battery is connected
with reversed polarity.
If this should happen, please contact our Service department!
7. SPECIFICATION
Operating voltage: 4,0 V – 9,0 V
Power supply: 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMh
Current drain, operating 30 mA
Current drain, stand-by: 10 μA
Peak current capacity: 2 x 10 A
Drop-out voltage: 0,25 V
Output voltage: 6,0 V/ 7,8 V stabilised
Supported telemetry system: P²BUS
Dimensions: 65 x 26 x 11 mm
Weight: 30 g
Temperature range: -30 °C to +105 °C