EasyManua.ls Logo

Powerbuilt EGS0252 - Specifications

Powerbuilt EGS0252
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
Hose
Do not allow hoses to come in contact with
engine muffler during or immediately after use.
DO NOT pull unit by pressure hose.
Engine
Do not adjust or attempt maintenance without
consulting supplied engine manual or having
adjustments made at an authorized service center.
Add stabilizer to petrol tank and let engine run for
5 minutes before storage.
Always turn on water before starting engine.
Soap/Chemicals
Use only soaps and chemical detergents designed
for waterblaster use.
Use Chemical nozzle (Black) with Soap/Chemicals.
Nozzle
Always keep nozzles unclogged.
Chemical/soap solutions cannot be applied using
high pressure setting. Set pressure pump to low
pressure and use low pressure nozzle.
Storage or Winterizing
Run clean water through chemical inlet.
Add stabilizer to any remaining petrol in petrol tank.
Do not allow water to freeze in pressure pump,
spray gun, spray wand or hoses.
Max Pressure 2400PSI
Max Water Flow 12LPM
Pump Type Triplex
Engine/Type Powerbuilt XT210 /OHV
HP/RPM 7/ 3600
Displacement 207CC
Petrol/Detergent Tank Capacity 3.6 / 3.8Liter
Pressure Hose 10Meter
Low Oil Sensor YES
Thermal Relief Valve YES
Adjustable Pressure Regulator YES
34