Powerbuilt EGS0252 - General Safety; Save Instructions for Future Reference; Recognise Safety Symbols and Labels

STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-29
ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28
PRESSURE PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29
WATERBLASTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
PREPARING FOR USE AFTER STORAGE . . . . . . . . . . . . . . . . . . . . . . . 29
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-34
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
1 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-37
CONGRATULATIONS!
Thank you for choosing this waterblaster. Our aim is to provide you with
quality professional products, and we want you to be totally satisfied with your prod-
uct and our Customer Service.When properly cared for, this product will give you many
years of satisfaction.
INTRODUCTION
This instruction manual is intended for your benefit. Please read and follow the safe-
ty, installation, maintenance and troubleshooting steps described within to ensure
your safety and satisfaction. The contents of this instruction manual are based upon
the latest product information available at the time of publication. The manufactur-
er reserves the right to make product changes at any time without notice.
GENERAL SAFETY
READ AND FOLLOW ALL INSTRUCTIONS.
Failure to follow all instructions in this manual could result in severe
personal injury or death. Keep this manual and refer to it for Safety
Instructions, Operating Procedures, and Warranty.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
RECOGNISE SAFETY SYMBOLS, WORDS AND LABELS
The safety instructions provided in this manual are not intended to cover all possible
conditions and practices that might occur when operating, maintaining and clean-
ing power tools.
Always use common sense and pay particular attention to all the
DANGER,
WARNING, CAUTION and NOTE statements in this manual.
This is the safety alert symbol. It is used to alert
you to potential personal injur
y hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
DANGER
2