7. Finger screw for mitre square
9. Finger screw for blade guard
10. Finger screw for parallel guide
Special safety instructions
For use on fl at and stable surfaces only.
Ensure the water tank is always full to keep
diamond disc cool when cutting tiles.
Never use bent or broken diamond discs.
Never stop the diamond disc by applying
pressure to the tile cutting machine or the
side of the diamond disc.
Never allow the diamond disc to be in
contact with the item to be cut – or other
objects – when starting the cutter.
Always use protective gloves when
handling the diamond disc. Never put
your hand near the diamond disc or try to
remove material from the working area
while the diamond disc is rotating.
To Next Page
Loading...