To Next PageTo Next PageWhy does my Powerfix Profi 278296 display 'Lo' or 'Hi'?
If the display shows 'Lo' or 'Hi' on your Powerfix Profi Measuring Instruments, it means the measurement range has been exceeded or you have not reached the measuring range.
How to fix too high or low measurements on Powerfix Profi 278296?
If the measurement from your Powerfix Profi Measuring Instruments is obviously too high or low, check that the device is set to measure the correct material. Also, ensure the measuring pins are correctly pressed against the material. After checking these, repeat the measurement.
What to do if the number on the Powerfix Profi Measuring Instruments display is not reacting?
If the number on the display of your Powerfix Profi Measuring Instruments is not reacting, check if the lock key is enabled on the display. If it is, press button 4 to unlock it.
What to do if the Powerfix Profi 278296 measurement is too high or low?
If the measurement from your Powerfix Profi Measuring Instruments seems incorrect, first ensure the device is set to measure the correct material. Also, check that the measuring pins are pressed firmly against the surface. If the issue persists, try repeating the measurement.
Why does my Powerfix Profi Measuring Instruments display show 'Lo' or 'Hi'?
If your Powerfix Profi Measuring Instruments display shows 'Lo' or 'Hi', it indicates that the measurement is either beyond the maximum range or hasn't reached the minimum range.
Why can I barely see the number on the Powerfix Profi Measuring Instruments display?
If you can barely see the numbers on your Powerfix Profi Measuring Instruments display, the battery is likely low. Please refer to the 'Inserting/ changing the battery' section for instructions.
What to do if electrostatic discharges cause malfunctions in Powerfix Profi Measuring Instruments?
If your Powerfix Profi Measuring Instruments is malfunctioning due to electrostatic discharge, remove the batteries briefly and then reinsert them.
General| Brand | Powerfix Profi |
|---|---|
| Model | 278296 |
| Category | Measuring Instruments |
| Language | English |
Warns about the Class 2 laser and potential eye damage from direct or reflected beams.
Provides essential safety guidelines for handling, charging, and disposing of batteries.
Explains the procedure for installing or replacing the device's battery.
Details the steps for turning on the device and performing basic length measurements.
Offers advice and conditions to ensure accurate measurements and prevent incorrect results.
