GB/CY6
DIGITAL CALLIPER
Introduction
We congratulate you on the purchase of your new product.
You have chosen a high quality product. The instructions for
use are part of the product. They contain important information
concerning safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety information and
instructions for use. Only use the product as described and for
the specified applications. If you pass the product on to anyone
else, please ensure that you also pass on all the documentation
with it.
Intended use
The product is suitable for outside, inside, depth measurement.
This product is intended for personal use. Not for commercial
use.
Scope of delivery
1 x digital calliper
1 x battery
1 x storage box
1 x instruction for use
Description of parts
1
Measuring surfaces
2
Internal measuring jaws
3
Inch / mm key
4
Locking screw
5
LCD display
6
Depth-measuring blade
7
Handwheel for measuring jaws
8
Battery compartment lid
9
Key for zero setting (ZERO)
10
ON / OFF key (ON / OFF)
11
External measuring jaws
Technical data
Measurement unit: mm / inch
Measuring range: 0 -150 mm / 0-6”
Resolution: 0.01 mm / 0.0005”
Accuracy
(Length measurement): 0-100 mm ± 0.02 mm / 0.001”
100-150 mm ± 0.03 mm / 0.001”
(Depth measurement): 0-100 mm ± 0.04 mm / 0.002”
100-150 mm ± 0.05 mm / 0.002”
Maximum measuring speed: 1.5 m/s, 60”/s
Measuring system: Liner capacitive measuring system
Display: LCD display
Operating temperature: +5 °C to +40 °C
To Next Page
Loading...
Need help?
General
