Cemb 3000
Battery Charger
Versions: Single_Phase
All battery chargers Cemb 3000 are conform to the following European standard
DIN 41772-3-4 “Charging method and curve of transformers”.
EN 60335–2-29 “Safety of electrical appliances and similar”.
EN 55014 “E.M.C. standards”.
73/23/EEC
“Electric material used within specific voltage limits”,
later modified by directive 93/68/EEC.
89/336/EEC
“Electromagnetic compatibility”,
later modified by directive 92/31/EEC.
The following equipment is covered by warranty.
The warranty certificate is attached to the following manual. If not, request it to your dealer.
To Next Page
Loading...
