MoDEf 4s
-
12"
(1o4
Rmml WOOD I ATHE MAINTE
NANCE I
NSTRUCT IONS
WOOD LATHE SAFETY
INSTRUCTIONS, cont'd
4i
21. MAKE NO ADJUSTMENTS EXCEPT SPEED CHANGE
ON
VARIABLE
SPEED
MODEL
ONLY
WITH
TH.
I
SPINDLE ROTATING and
always
disconnect
machine
f rom
power
source when
performing
maintenance
to avoid accidental
starting
or electrical shock.
22.
BOLT
THE
LATHE
TO THE FLOOR through the
lag holes
provided
to avoid any
tendency
of the
lathe
to
tip
or shift
during turning operations.
23.
PROVIDE FOR ADEOUATE SURROUNDING
WORK SPACE and overhead
non-glare lighting.
,
Powermatic recommends the use of
non-skid
floor
strips on the
floor area
where
the operator
nor-
mally
stands
and
marking
off a
work
area
for each machine.
24.
DON'T STAND
lN LINE WITH ANY LARGE
DIAMETER
PART
being turned
OR
ALLOW ANIY-
i
ONE
ELSE TO DO SO.
25. When stopping
the
lathe,
I{EVER GRAB THE
PART OR
FACE PLATE TO SLOW lT DOWN.
Let
the
work
coast
to
a
stop.
26. Use
only
Powermatic
or
factory
authorized
replacement
parts
and
accessories;
otherwise,
the
war-
ranty and
guarantee
are
null
and
void.
27.
DO
NOT
USE THIS POWERNTATIC
WOOD LATHE
FOR
OTHER
THAN
ITS
INTENDED
USE.
IF USED
FOR
OTHER
PURPOSES.
POWERMATIC DISCLAIMS ANY
REAL
OR
IMPLIED WAR-
RANTY
AND HOLD ITSELF HARMLESS FROM
ANY INJURY THAT
MAY RESULT
FROM
THAT USE.
WARNING: DO
NOT EOUIP
OR
USE THIS
MACHINE WITH A MOTOR LARGER
THAN 3/4
HORSEPOWER AT
18OO
RPM. THE USE OF
A LARGER OR
HIGER
SPEED
MOTOR VOIDS
@.
4
To Next Page
Loading...
