PowerMax ASE59 - User Manual

1/8
1
2 3
4
Roller AC Servo System
HMI-14 User Manual
1 Installation Instructions
1.1 Product specifications
Product Type ASE59 Supply Voltage AC 220 ± 44 V
Power frequency 50Hz/60Hz Maximum output power 550/750W
1.2 Interface plug connections
The pedals and the machine head of the connector plug are mounted to the corresponding position in the controller back of
socket, as shown in Figure 1-1. Please check if the plug is inserted firmly.
Fig.1-1 Controller Socket Diagram
① Foot lifter solenoid socket; ② Machine head solenoid socket; ③ Lifter needle lock socket; Pedals socket;④
： The use of the normal force are not inserted into the plug and socket, please check whether the matching, direction or
needle insertion direction is correct! Lighting interface and presser foot lifting electromagnet interface is a 1*2 interface, head
lamp interface using black interface, please pay attention to the distinction .
· Please read this manual carefully, also with related manual for the machinery before use the controller.
· For installing and operating the controller properly and safely, qualified personnel are required.
· Please try to stay away from arc welding equipment, in order to avoid electromagnetic interference and
malfunction of the controller.
· Keep in room bellow 45° and above 0°
· Do not humidity below 30% or above 95% or dew and mist of places.
· Install the control box and other components, turn off the power and unplug the power cord.
· To prevent interference or leakage accidents, please do the ground work, the power cord ground wire
must be securely connected to an effective way to earth.
· All parts for the repair provided by the Company or approved before use.
· Performing any maintenance action, you must turn off the power and unplug the power cord. There are
dangerous high voltage control box, you must turn the power off after one minute before opening the
control box.
· This manual marked with the symbol of the Department of Safety Precautions must be aware of and
strictly adhered to, so as not to cause unnecessary damage.

Safely Instruction

Summary

Safely Instruction

Installation Instructions

Product Specifications

Details product type, supply voltage, power frequency, and output power.

Interface Plug Connections

Explains how to connect plugs for pedals and machine head to the controller.

Wiring and Grounding

Operation Panel Instructions

Operation Panel Display Instruction

Describes the visual layout and components of the operation panel.

Key Functions Overview

Explains the function of each key on the operation panel for setting parameters and modes.

System Parameters Setting List

Technician Mode Parameters

Details how to enter technician mode and modify technical parameters.

Administrator Mode Settings

Monitor Mode Usage

Warning and Error Codes

Warning Messages

Lists warning codes and their corresponding corrective actions.

Error Mode Troubleshooting

Details error codes, their descriptions, and troubleshooting solutions.

Special Functions

Up Needle Stop Position Adjustment

Step-by-step guide to adjust the up needle stop position.

Default Factory Setting Recovery

Procedure to restore the system to its default factory settings.

Pedal Sensitivity Adjustment

Explains how to adjust pedal response for user preference.

PowerMax ASE59 Specifications

General

Brand	PowerMax
Model	ASE59
Category	Controller
Language	English