EasyManua.ls Logo

PowerMax JogPad-2 - Page 6

PowerMax JogPad-2
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.powermaxfitness.net
6
it's easy to cause accident or injury.
Do not use the power plug with needles, garbage or water.
It may cause electric shock, short circuit and fire.
Do not pull out the power plug or switch the power switch to “off “during use.
It may cause injury.
Never Use It with Wet Hands
Do not pull out or insert the power plug with wet hands.
It's likely to cause electric shock or injury
Pull Out the Power Plug
Please pull out the power plug from socket when you don't use it.
Dust and moisture make it insulation deterioration and lead to electricity leakage and
fire.
Please be sure to pull the power plug from the socket during maintenance.
Failure to comply may result in electric shock or injury.
Please stop using it if the device does not start or runs abnormally. Immediately pull out
the power plug and entrust inspection and repair.
Failure to comply may result in electric shock or injury.
Pull out the power plug immediately in case of power failure.
Otherwise it's likely to occur accidents or injuries when the power restored.
Do not hold the cable tight. Hold the power plug to pull out the plug.
Otherwise, it may cause short circuit, electric shock and fire.
Grounding Instructions
The product must be grounded. Grounding provides the channel with the least resistance
to current to minimize the risk of electric shock if the function of this machine does not
work normally.
This product is equipped with a grounded conductor and a plug for the device. The plug
must be properly installed, grounded and plugged into an appropriate electrical outlet in
accordance with local codes or regulations.
Dangerous
There is a risk of electric shock if the device is not properly grounded. Please contact an
electrician to check if the grounding of the product is correct, if the plug does not fit into
the socket it cannot be changed. Please inform a qualified electrician with the installation
of a suitable socket.

Related product manuals