EasyManua.ls Logo

Powerplay PJR 2000PC - Page 5

Powerplay PJR 2000PC
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
SAFETY INFORMATION
SAFETY INFORMATIONSAFETY INFORMATION
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT: Store the power washer indoors to prevent
the water in the unit from expanding under freezing
conditions. When the water freezes and expands, your
power washer will be damaged and become inoperable.
Or, if storing outdoors, it is recommended you use pump
saver (not included) to protect pumps.
25. NEVER use hot water with your power washer. It will
overheat and damage the high pressure pump.
26. NEVER leave the power washer unattended while it
is powered “ON”.
27. ALWAYS turn the water supply “ON ” before turning
the power washer power to “ON”. Running the pump
dry will cause damage to the internal components.
28. NEVER use a water supply to your power washer
that exceeds 150 PSI maximum.
29. NEVER disconnect the high pressure hose from the
power washer while the system is pressurized.
30. NEVER permanently engage the trigger mechanisms
on the spray gun.
31. NEVER operate the power washer unless all
components are properly and securely connected.
32. NEVER allow the power washer pump to run for
more than one minute after you have turned off the
water supply. This can cause the motor and pump to
overheat and fail.
33. NEVER use lances or other parts that are not
compatible for this specic Powerplay unit.
34. NEVER spray any electrical outlet with your power
washer.
35. Inspect the power cord before using. DO NOT use it if
it is damaged.
94260_PJR 2000 PC ENG-FR-SP .indd 5 17/2/17 上午10:14

Related product manuals